Go to www.simex.it

asphalt granulator buckets

CBA asphalt granulator buckets are specifically designed for the volumetric reduction of asphalt slabs or other aggregates directly on site. The cylindric drum composed of interchangeable teeth is activated by direct-drive high-displacement radial piston motors.

The back-grille determines the size of the spoil piece and it is available in different setup. The result is a reclaimed asphalt pavement (RAP) with a certifiable and measurable granulometry.

Automatic system inverts the rotation of the drum in case of blocking, granting high productivity and avoiding downtimes.

Advantages

MODELS AND TECHNICAL DATA °°° CBA 20 CBA 30 CBA 40
Rec. excavator weight (1) (2)

ton

12-18

18-28

25-40

.

lbs

26400-40000

40000-62000

55000-88000

Drum width

mm

735

915

1050

.

inch

29

36

41

Total width

mm

1485

1700

1960

.

inch

58

67

77

Bucket capacity (SAE)

0,60

0,80

1,00

.

yd³

0,78

1,05

1,30

Diameter of perforated grid

mm

25-30-35-40

25-30-35-40

25-30-35-40

.

inch

1-1,2-1,4-1,6

1-1,2-1,4-1,6

1-1,2-1,4-1,6

Operating weight (3)

kg

1320

2170

2900

.

lbs

2900

4775

6400

Required oil flow

l/m

100-190

150-250

200-350

.

gpm

25-50

40-66

53-93

Max. required oil pressure

BAR

350

350

350

.

psi

5100

5100

5100

1) The maximum operating load permitted for the excavator, when added to the weight of the standard bucket, must match or exceed the weight of the crusher bucket at full load.(2) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements. (3) Without mounting bracket.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.

Features

CBA asphalt granulator buckets are specifically designed for the volumetric reduction of asphalt slabs or other aggregates, directly on site, at a certifiable grain size. Available in 2 models for excavators from 18 to 40 tons.

Recycling of asphalt milling

Simex has chosen to focus on the recycling of asphalt milling, more correctly called today bituminous conglomerate granulate by the legislation (called RA or RAP - Reclaimed Asphalt Pavement), beginning from its expertise in the field of crushing and screening waste materials from demolition.

The circular economy of this sector

In the world of road maintenance and paving, as well as construction, the issue of recovering material deriving from demolition and scarification is becoming increasingly urgent, with the dual objective of combining environmental protection with economic savings.

Now, as never before, it is necessary to realize the sector features its own circular economy, particularly in regards to bituminous conglomerates: road paving can be recycled several times, in full compliance with the regulations in force. Almost 10 million tons of milled bituminous conglomerate are produced every year in Italy. Significant amount, which corresponds to approximately 18% of all waste from C&D (Construction and Demolition).

milling drum with interchangeable teeth

The CBA asphalt granulator bucket is available in 3 models for excavators from 12 to 40 tons. The equipment features a cylindrical drum consisting of interchangeable teeth, driven by large displacement radial piston hydraulic motors, in direct drive.

CBA30

Configurable back-grid

The rear grid determines the grain size of the material output and is available in several configurations, to meet the different characteristics required for the milled material by the regulations in force in various countries.

The standard passing grid features holes of 25 mm diameter which produce a 0-20 mm output size of the crushed asphalt. Passing grids of different sizes are available on request.

environmental protection

Cutting down the time and costs related to transport, minimizing the purchase of new raw materials, means optimizing the logistical and economic dynamics of your site, while keeping a watchful eye on the issue of environmental impact and the recovery of those materials which, subject to specific local regulations, could be considered a resource and no longer waste.

CBA 30 granulator bucket

Applications

Simex CBA asphalt granulator bucket is specifically designed for processing asphalt but it grants optimal performance also with other construction site aggregates such as tiles, bricks and concrete.

Asphalt crushing

Simex CBA granulator bucket is specifically designed for the volumetric reduction of asphalt slabs deriving from road pavements demolition.

Recycling waste material

CBA bucket features a milling drum that can easily process also other construction site aggregates such as bricks, concrete or tiles.

REQUEST INFORMATION

Fields marked with an asterisk (*) are mandatory.